hot water mixing/divider carbon steel electric 3 way control valve
hot water mixing/divider carbon steel electric 3 way control valve
hot water mixing/divider carbon steel electric 3 way control valve Specification
-
control valve Body type: 3-way casting globe type Spool type: 3-way double seat spool Nominal size: DN20~300,、 NPS 3/4〞~ 12〞 Nominal pressure: PN16 ~ 100、 CLASS 150LB ~ 600LB Connection: flange: FF、RF、MF、RTJ Welding: SW、BW Flange dimension: According to to IEC 60534 Electric 3 way control valve
Bonnet type:Ⅰ:standard type（-20℃~230℃）
Ⅱ:Radiator type: （-45℃~ high than 230℃ occasion）
Ⅲ:Low temperature extended type（-196℃~ -45℃）
Ⅳ:Bellow seal type
Ⅴ:Warm insulation Jacket typePacking: V type PFTE packing, flex. graphite packing, etc. Gasket: Metal graphite packing Electric 3 way control valve
Actuator:Electric: 3810L series smart actuator, PSL series actuator.
hot water mixing/divider carbon steel electric 3 way control valve performance
| Electric 3 way control valve Flow characteristic | Linear, percentage | |
| Allowable range | 30: 1 | |
| Rated Cv value | Percentage / linear CV8.5~1280 | |
| Electric 3 way control valve Allowable leakage |
Metal seal: IV grade（0.01% rated capacity） Leakage standard: GB/T 4213 |
|
| ZRHF Electric 3 way control valve Performance | ||
| Intrinsic error (%) | ±1.0 | |
| Return difference(%) | ≤1.0 | |
| Dead zone(%) | ≤1.0 | |
| Difference from beginning to end point(%) | ±2.5 | |
| Rated travel difference(%) | ≤2.5 | |
hot water mixing/divider carbon steel electric 3 way control valve special requirement
| Special test | Material penetration flaw detection (PT), radiator test (RT), flow characteristic test, low temperature test. |
| Special treatment | Trim nitrogen treatment, seat hard alloy treatment. |
| Special rinse | Degreasing and dehydration treatment |
| Special condition | Special piping or connection, vacuum condition, S.S fastener, special coating. |
| Special dimension | Customized face to face length or dimension |
| Test and inspection | Third party test report |
hot water mixing/divider carbon steel electric 3 way control valve actuator parameter
| Electric 3 way control valve Type\ Method |
Electric actuator |
| 3810L series | |
| Intelligent integrated type | |
| Usage | Regulating |
| Air supply pressure or Power supply voltage | Power: AC 200V±10% 50Hz Or Power: AC 380V±10% 50Hz |
| Connector | Normal type: cable inlet 2-PF(G1/2〞) Explosive proof: Protection jacket PF(G3/4〞) |
| Direct action | Input signal increase, stem descend, valve close. |
| Reaction | Input signal increase, stem ascend, valve open. |
| Input signal | Input/output4～20mA.DC |
| Lag | ≤0.8%FS |
| Linear type | ≤+1%FS |
| Environmental temperature | Standard type: -10℃～+60℃ With space heater : -35℃～+60℃ Explosive proof: -10℃～+40℃ |
| Electric 3 way control valve Accessories |
Space heater (normal type) Non-standard accessories, need special customized notes. |
hot water mixing/divider carbon steel electric 3 way control valve parameter
-
Seat diamter（mm） 25 32 40 50 65 80 100 125 150 200 250 300 Rated flow coefficient, CV 8.5 13 21 34 53 85 135 210 340 535 800 1280 Nominal size Travel Option flow coefficient Cv（★standard ●recommended） DN25 16 mm ★ DN32 25 mm ★ DN40 ● ★ DN50 ● ● ★ DN65 40mm ★ DN80 ● ★ DN100 ● ● ★ DN125 60mm ★ DN150 ● ★ DN200 ● ● ★ DN250 100mm ● ● ★ DN300 ● ● ★ Electric actuator Electric 3 way control valve
Metal sealing max. allowable pressure difference（MPa）Type Thrust（N） 3810L-08 800 1.52 3810L-20 2000 3.05 1.86 1.19 0.76 3810L-30 3000 2.79 1.79 1.14 3810L-50 5000 4.66 2.98 1.91 1.13 0.6 0.47 3810L-65 6500 1.35 0.8 0.57 0.39 0.26 0.16 3810L-99 10000 0.61 0.42 0.20 0.17 0.11 3810L-160 16000 0.97 0.67 0.35 0.27 0.18
Write your message here and send it to us
