Top Suppliers Automotive Electric Heater Control Valve - hot water mixing/divider carbon steel electric 3 way control valve – Hoyee
Top Suppliers Automotive Electric Heater Control Valve - hot water mixing/divider carbon steel electric 3 way control valve – Hoyee
Top Suppliers Automotive Electric Heater Control Valve - hot water mixing/divider carbon steel electric 3 way control valve – Hoyee Detail:
hot water mixing/divider carbon steel electric 3 way control valve Specification
-
control valve Body type: 3-way casting globe type Spool type: 3-way double seat spool Nominal size: DN20~300,、 NPS 3/4〞~ 12〞 Nominal pressure: PN16 ~ 100、 CLASS 150LB ~ 600LB Connection: flange: FF、RF、MF、RTJ Welding: SW、BW Flange dimension: According to to IEC 60534 Electric 3 way control valve
Bonnet type:Ⅰ:standard type（-20℃~230℃）
Ⅱ:Radiator type: （-45℃~ high than 230℃ occasion）
Ⅲ:Low temperature extended type（-196℃~ -45℃）
Ⅳ:Bellow seal type
Ⅴ:Warm insulation Jacket typePacking: V type PFTE packing, flex. graphite packing, etc. Gasket: Metal graphite packing Electric 3 way control valve
Actuator:Electric: 3810L series smart actuator, PSL series actuator.
hot water mixing/divider carbon steel electric 3 way control valve performance
| Electric 3 way control valve Flow characteristic | Linear, percentage | |
| Allowable range | 30: 1 | |
| Rated Cv value | Percentage / linear CV8.5~1280 | |
| Electric 3 way control valve Allowable leakage |
Metal seal: IV grade（0.01% rated capacity） Leakage standard: GB/T 4213 |
|
| ZRHF Electric 3 way control valve Performance | ||
| Intrinsic error (%) | ±1.0 | |
| Return difference(%) | ≤1.0 | |
| Dead zone(%) | ≤1.0 | |
| Difference from beginning to end point(%) | ±2.5 | |
| Rated travel difference(%) | ≤2.5 | |
hot water mixing/divider carbon steel electric 3 way control valve special requirement
| Special test | Material penetration flaw detection (PT), radiator test (RT), flow characteristic test, low temperature test. |
| Special treatment | Trim nitrogen treatment, seat hard alloy treatment. |
| Special rinse | Degreasing and dehydration treatment |
| Special condition | Special piping or connection, vacuum condition, S.S fastener, special coating. |
| Special dimension | Customized face to face length or dimension |
| Test and inspection | Third party test report |
hot water mixing/divider carbon steel electric 3 way control valve actuator parameter
| Electric 3 way control valve Type Method |
Electric actuator |
| 3810L series | |
| Intelligent integrated type | |
| Usage | Regulating |
| Air supply pressure or Power supply voltage | Power: AC 200V±10% 50Hz Or Power: AC 380V±10% 50Hz |
| Connector | Normal type: cable inlet 2-PF(G1/2〞) Explosive proof: Protection jacket PF(G3/4〞) |
| Direct action | Input signal increase, stem descend, valve close. |
| Reaction | Input signal increase, stem ascend, valve open. |
| Input signal | Input/output4～20mA.DC |
| Lag | ≤0.8%FS |
| Linear type | ≤+1%FS |
| Environmental temperature | Standard type: -10℃～+60℃ With space heater : -35℃～+60℃ Explosive proof: -10℃～+40℃ |
| Electric 3 way control valve Accessories |
Space heater (normal type) Non-standard accessories, need special customized notes. |
hot water mixing/divider carbon steel electric 3 way control valve parameter
-
Seat diamter（mm） 25 32 40 50 65 80 100 125 150 200 250 300 Rated flow coefficient, CV 8.5 13 21 34 53 85 135 210 340 535 800 1280 Nominal size Travel Option flow coefficient Cv（★standard ●recommended） DN25 16 mm ★ DN32 25 mm ★ DN40 ● ★ DN50 ● ● ★ DN65 40mm ★ DN80 ● ★ DN100 ● ● ★ DN125 60mm ★ DN150 ● ★ DN200 ● ● ★ DN250 100mm ● ● ★ DN300 ● ● ★ Electric actuator Electric 3 way control valve
Metal sealing max. allowable pressure difference（MPa）Type Thrust（N） 3810L-08 800 1.52 3810L-20 2000 3.05 1.86 1.19 0.76 3810L-30 3000 2.79 1.79 1.14 3810L-50 5000 4.66 2.98 1.91 1.13 0.6 0.47 3810L-65 6500 1.35 0.8 0.57 0.39 0.26 0.16 3810L-99 10000 0.61 0.42 0.20 0.17 0.11 3810L-160 16000 0.97 0.67 0.35 0.27 0.18
Product detail pictures:
Related Product Guide:
With this motto in mind, we've turn into one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for Top Suppliers Automotive Electric Heater Control Valve - hot water mixing/divider carbon steel electric 3 way control valve – Hoyee , The product will supply to all over the world, such as: Macedonia, Spain, US, We are fully aware of our customer's needs. We provide high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
By Candance from Costa Rica - 2018.06.12 16:22
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Grace from Egypt - 2018.09.12 17:18
Write your message here and send it to us
